2859 SBC Victor Manifold - Glidden 18 Degree

2859 SBC Victor Manifold - Glidden 18 Degree

Availability: In stock

Product type:

Vendor: greatparts

Regular price $0.00 $932.69

Intake Manifold All-out Nitrous-assisted Carb Mount Flange Edelbrock Victor 15-18 Degree Intake Manifold For 15 and 18 Degree Chevy for 4500 Series...

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Guaranteed safe checkout:

Intake Manifold
All-out Nitrous-assisted
Carb Mount Flange

Edelbrock Victor 15-18 Degree Intake Manifold For 15 and 18 Degree Chevy for 4500 Series Carburetors Edelbrock part #2859 Victor Glidden intake manifold is for all-out nitrous-assisted drag race applications. Designed with noted drag racer Billy Glidden, it features intake runners with a large cross-section area of 3.2 square-inches for maximum high-end horsepower in engines operating from 5000 to 8500 rpm with GM or Edelbrock 18-degree heads. Carb mount flange and plenum are machined for 4500 Series carburetors and require port matching and blending prior to use. The Edelbrock Victor Glidden is a single-plane, high-rise intake designed for maximum race-winning power at higher engine speeds. Manufacturer Edelbrock Application Application Specific UPC 00085347028597 Series Victor Gasket Or Seal Included No Vehicle Model Chevrolet Availability Note Available to Order Warranty 12 Months Ec Basic Operating Rpm Range 5000-8500 RPM Emissions Code Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. Installation Notes Recommended intake gasket: Edelbrock #7218 or Fel-Pro #1282; Carb Pad Height: 7.03"; For use with 15 and 18 Degree Chevy with 4500 Series Carburetor.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Optimum cylinder head port opening size should be as close as possible to the size of the gasket being used.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage. Center Maximum Height 7.030 in CNC Ported No Finish Satin Front Maximum Height 7.030 in Material Aluminum Rear Maximum Height 7.030 in Single Or Dual Plane Type Single

Your order are processed for fast delivery within 24hrs.