Categories
Best sellers
Regular price
$39.99
Regular price
$259.00
Regular price
$9.99
Filter
Ask a Question
FS-15 Series Rear Bumper Compatible with 2021-2023 Ford Bronco | High Clearance | Fits up to 37" Tires | Retains OEM Backup Sensors | Pod Light Mounts | Dual Clevis Mount |
Regular price $0.00 $1,412.10
High Quality Materials - Manufactured utilizing precision cut and machine bent plated steel with strategic joints reinforced and gusseted for superior strength,...
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
- High Quality Materials - Manufactured utilizing precision cut and machine bent plated steel with strategic joints reinforced and gusseted for superior strength, durability, and stability
- Lighting - Our bumper can mount two 3-inch flush mount pod lights. The license plate mount above the bumper will include a mount to house a LED plate light. Please note: Lights are not included
- Design - Our full size steel bumper includes pre-drilled factory sensor positions, auxiliary light positions, and reinforced D-Ring mounts. Please note D-Rings are not included
- Fitment - DV8's FS-15 Series Rear Bumper is compatible with 2021, 2022, & 2023 Ford Broncos, 2-Door & 4-Door, & all trim levels
- Install - Installation is simple our rear bumper will bolt into existing factory holes. Our bumper takes approximately 2.5 hours to install. The installation guide can be downloaded below.
Product Description
FS-15 Series Rear Bumper
Shown with optional flush mount LED lights (not included with bumper)
The DV8 Offroad FS-15 Series Rear Bumper was designed to provide superior rear-end protection by maximizing ground clearance with a high clearance body fitment and sharply angled corners. This bumper is constructed from 3.5mm steel plating with 5mm reinforced steel supports for strength and rigidity, then finished in a finely textured black powder coat to protect against rust and add durability to the bumper. Constructed to accept two 3" flush mount pod lights to increase your rear field of view, with two reinforced clevis mounts that accept a ¾-inch D-ring shackle to provide recovery options in case you get into trouble on the trail. Predrilled positions are ready to accept the factory sensors. The license plate mount is relocated above the bumper and includes an LED plate light. Our Rear Bumper is capable of accommodating up to a 37-inch spare tire in its cut-out.
TUCKED AWAY
Following the contours of the body and the sharp angular edges, our rear bumper tucks up higher than the factory bumper offering better obstacle clearance on the trails
AUXILIARY LIGHTING & RECOVERY
To aid in increasing your field of view on the trails, the rear bumper includes two cutouts to install a flush mount pod light (BE3FMW40W Recommended), as well as two clevis mounts that can fit a 3/4" D-ring.
Extra Safe on the Roads
Predrilled openings are designed to fit your factory sensors to retain the use of the factory programs without complications
QUICK NOTES
- Made from 3.5mm Steel with 5mm Supports
- Multi stage powder coat protection
- Fits up to a 37" tire
- Works with factory tow hitch packages
| SERIES | FS-15 | FS-15 | FS-15 | FS-15 |
|---|---|---|---|---|
| FITMENT | FRONT BUMPER | FRONT BUMPER WINGS | REAR BUMPER | ROCK SLIDERS |
| SERIES | MTO - MADE TO OVERLAND | MTO - MADE TO OVERLAND | MTO - MADE TO OVERLAND | OE PLUS | OE PLUS |
|---|---|---|---|---|---|
| FITMENT | FRONT BUMPER | REAR BUMPER | BULL BAR ADD-ON | FRONT BUMPER | ROCK SLIDER w/ STEP |
| MOUNT LOCATION | ABOVE WINDSHIELD | ABOVE WINDSHIELD | A-PILLAR | FOG LIGHT POCKETS |
|---|---|---|---|---|
| LIGHTS USED | 52" BAR OR 16 3" PODS | 12 3" PODS | DUAL 3" PODS PER SIDE | DUAL 3" PODS PER SIDE |
| PURPOSE | ADAPTATIVE CRUISE CONTROL BRACKET RELOCATOR | 3RD BRAKE LIGHT EXTENSION BRACKET | REAR SPEAKER & LIGHT MOUNT BAR | FRONT STEEL SKID PLATE | LOWER CONTROL ARM SKID PLATES |
|---|
Commitment to Excellence
DV8's Mission
Make the best looking, most durable, most functional aftermarket products on the market. We have had a winning formula of listening to what the off-road enthusiast wants most and delivering that product to the off-road community.
Product Development
Each part form fit, CAD designed, laser cut, CNC’d, bent, welded, ground and finished with DV8 pride. If that wasn't already enough...we trail test all our products, ensuring we are providing high-quality accessories for you and your vehicle
Your order are processed for fast delivery within 24hrs.
- Standard delivered 4-5 Business Days
- Express delivered 2-4 Business Days
Orders are processed and delivered Monday-Friday (excluding public holidays)
eMarket members enjoy free returns.
Related Products
Out of stock
Sale
-61%
Chat with Us
